No products in the cart.
Arcadia
- Fahrenheitstraat 5, Harlingen, Netherlands
- +31615407476
- marvin@commodore.frl
-
Commodore Developers Conference FOlder – Confidential
A rarity! Original big folder with lot of inside information about the Commodore Amiga brand.
€195,00 -
Triple Play Plus
The Triple Play Plus is a multiple MIDI-Out box originally designed for use with Blue Ribbon’s Bars & Pipes software. The box contains three independent MIDI outputs, each having it’s own set of 16 MIDI channels, giving a total of 48 MIDI Channels. It can also be used with any software that supports the CAMD MIDI library via a special driver, and as a “normal” single-output MIDI interface with any other MIDI software. The second and third outputs are redundant in this case.
The box contains a long shielded ribbon cable for connecting to the Amiga’s serial port and 5 female 5-pin DIN sockets. The DIN sockets correspond to MIDI In, MIDI Thru (which replicates the data sent to MIDI In), Out 3, Out 2 and Out 1.
The hardware was designed by Design Computer Systems Inc. Florida
€25,00 -
C64 Games System cartridge
As rare as the C64GS itself.
€19,95 -
-
Buddha Flash
Buddha is an IDE controller for the Zorro slot of Amiga computers.
- Autoboot with Kickstart 1.3, 2.0, 3.0, 3.1, 3.2
- two IDE-Ports for up to four IDE-devices, additional clockport
- compatible with nearly every IDE/Atapi devices:
- harddisks
- DOM (Disk-On-Module) modules (40-pin)
- Industrial-CF cards
- CD/DVD drives
- Installer for automatic partitioning and installation of OS versions 1.3, 2.1, and 3.1
- Automatically installs support for CD/DVD drives
- OS 3.2 can later be installed over the OS 3.1 installation (also from CD)
- Installation of OS 3.1 and OS 3.2 both work with either OS 3.1 or 3.2 ROMs installed.
Transfer rates of more than 2.2 MBytes per second can be reached. The raw data transfer rate is only limited by the zorro bus: 3.58 MBytes per second. The latest 20-year anniversary edition can even reach higher speeds using the Fast-Z2 mode of the Z4 board.
Harddisks larger than 4GiB have been a problem for the Amiga for a very long time. The Buddha supports both the TD64 and NSD64 standards to overcome this limitation. The included automatic installer can partition, format and install drives of any size, and it comes with the PFS3 filesystem to format partitions bigger than 4GiB.
€59,95 -
Squirrel Scsi interface for Amiga 1200/600
Add a SCSI CDrom to your Amiga 1200!
€75,00€149,00 -
-
Commotron gamepad C64G style – wireless [NEW]
Wireless joystick for all Atari-compatible joystick ports. Brand new and ultra-fast response! A must have for fast games. Other versions available.
TURBO 2000 SUPER Wireless Power! 😜
The new GamePad for real computers!
Up to 6 meters / 20 feet wireless distance!
Standard Commodore / Amiga Joystick Interface!
3 real fire buttons (pot x and y standard)
4 speed programmable Autofire!
Memory function for button mappings
Commodore, Amiga, Atari ST, VCS 2600 7800 and Spectrum compatible
Runs on 2 standard AAA batteries (not included)
UP arrow mapped to separate Jump Button for best GamePad feeling!
€37,50€39,95 -
Individual A512 memory expansion for Amiga 500
he A512 is our interpretation of a 512kByte trapdoor memory expansion for the A500 computer. This means that it’s not just yet another copy of a product that was available from lots of second-source manufacturers during the late 1980s and 1990s, but it is looking at the needs of all A500 owners today:
- 512k RAM
- pass-through port for use in Amiga 500+
- space for an RTC module
- compatible with ECS Agnus types for Chipram expansion
- safe operation with OCS Agnus 8370 and 8371
Today’s collectors and computer restauration experts like to keep a separate computer with a full OCS chipset and just a trapdoor memory expansion for the classic 0.5M Chipram and 0.5M ranger-mem configuration. With many second-source memory expansions using megabit memory chips, the setup will tend to run unstable, because the OCS Agnus types 8370 and 8371 will not generate enough refresh-addresses for most trapdoor memory expansions that use less than 16 memory chips.
Our A512 memory expansion will run properly with all Agnus types, including OCS chips. Thanks to an additional refresh circuit, the single 4MBit memory chip will get enough refresh addresses to keep it’s contents in any configuration, while running cool at the low power consumption that the more modern memory architecture provides.
When operated in an A500+ computer, the A512 will be used as Chip ram, and two of these expansions can be cascaded to reach the maximum configuration of 2MBytes graphics memory (1 MByte on the main board, and 1 MByte in the trapdoor slot). The pass-through port is compatible with any other 512k trapdoor expansion, as long as it fits mechanically. The A500+ on-board RTC is only switched off if the RTC module has been installed on the A512 card, or an RTC on the second card is present.
The A512 memory expansion is compatible with all motherboard revisions from Rev.3 to Rev.8, including the A500+. Picture may vary – the 2020 production run looks a bit different, but is functionally identical.
€24,95€31,19