Run Stop Re-Store
- Utrechtseweg 47H, Utrecht, Netherlands
- info@runstoprestore.nl
-
€5,00 – €6,00 -
Commodore 64 CIA 6526
Commodore CIA 6526 for the Commodore 64. These are used chips and pulled from sockets. Chips are in top condition, full and straight legs, and of course tested with a diagnostic harness and fully working.
There is a 1 piece per customer limit on this product. If you need more, please email info@runstoprestore.nl
€24,95Commodore 64 CIA 6526
€24,95 -
Commodore VIC20 Character ROM 901460-3 (New Old Stock)
Brand new and unused Character ROM for the Commodore VIC 20
€14,95 -
Commodore VIC20 Basic ROM 901486-01(New Old Stock)
Brand new and unused Basic ROM for the Commodore VIC 20
€14,95 -
MOS6522 for Commodore VIC20 or 1541 (New Old Stock)
Brand new and unused MOS6522 VIA chip. Used in the Commodore VIC20 and several 15xx series floppy drives.
€14,95 -
C64 Modulator replacement (c0pperdragon)
Replacement for the original RF modulator. Creates the output video signals needed to use the video out DIN connector of the C64 mainboard. Increased signal quality over the original by removal of obsolete components and less susceptible to interference. Board design by “c0pperdragon”. Fully manufactured PCB with components assembled at the factory. Ships with sets of male and female round pin headers for direct to board mounting, or make it removable. Comes with a full year warranty.
Price including tax
€13,95€15,95C64 Modulator replacement (c0pperdragon)
€13,95€15,95 -
Commodore VIC20 Video/Audio Chip MOS6561-101 (New Old Stock)
Brand new and unused MOS6561-101 Video + Audio chip for the VIC20. Chip tested before shipping.
Price including tax
€24,95 -
Commodore 64C PAL VIC-II CSG8565R2 (New Old Stock)
Brand new and unused VIC-II chip for PAL C64Cs. Shortboard versions only (250469 Rev A & B). Chip tested before shipping.
Price including tax
€29,95 -
Commodore 64 CPU CSG8500 (New Old Stock)
Brand new and unused CPU, type CSG8500, for the Commodore 64. Compatible with all revisions. Tested before shipping.
There is a one piece per customer limit on this item. If you need more, please email info@runstoprestore.nl
€29,95 -
-
€16,00 – €20,00
-
Commodore 64 heatsink kit
A set of heatsinks for Commodore 64’s. Keep your CPU, SID, VIC and PLA cool with these perfectly fitting black aluminum heatsinks.
Standard kit containes 2x 2 sizes, for 28 pin and 40 pin chip packages. XL contains 4x40p, 3x24p and 2x28p to cover all the MOS chips.
Heatsinks have thermal tape pre-applied, so no fiddling with thermal paste. Removal is also easy using a hairdryer, and leaves no residue on the chips.
Package includes an alcohol wipe to use before applying.
Price includes tax.
€6,95 – €12,50 -
-
-
Commodore 64 PCB connector kit
Full PCB connector kit for Commodore 64 (All revisions)
€27,95 -
Sixtyclone C64 replica revision 250407/466/469 full assembly service
CONTACT martijn@runstoprestore.nl before ordering!
Sixytclone bare-bone Commodore 64 motherboard revision 250407, 466 or 469 fully assembled.
- Blue, Black or Pink PCB (official Sixtyclones).
- Choice of gold plated turned (machined) pin sockets or high quality dual leaf.
- Choice of 0.1uF monolythic filter caps (yellow or blue).
- Nichicon Fine Gold and Frako audio grade electrolytic capacitors, or Panasonic and Cornell Dublier brand (black and blue colored).
- New passive components and semiconductors, bridge rectifier, choke filters etc etc
- New mechanical parts (DIN sockets, cartridge port connector, control ports + mounting screw and nut, power switch, pin headers, fuse and fuseholder.
- Modulator housing and cartridge port shield refurbished and repainted (Silver, Gold, Black), or modern alternative fitted.
- Modulator modified to give Composite signal on the output jack.
- Comes populated with all new logic chips and RAM but does NOT include CPU, SID, VIC, PLA, CIAs, or ROMs. (Pictures showing any custom chips are for illustration purposes only). PLA replacement is an optional purchase (PLAnkton or NeatPLA, add EUR15)
- Optional ESD protection on control ports (add 10EUR)
- Free optional repainted (black) sidebracket when using breadbin cases.
- Board will be configured for PAL.
After manual assembly the board will be thoroughly tested with a full chipset and diagnostic harness, including a multitude of different cartridge types.
Price includes tax
€199,00 -
Robocop poster (high quality JPG)
Remake of the poster for the game Robocop, made by Martijn Bosschaart.
€0,00 -
Hardball C64 game poster (high quality JPG)
Game poster for the game Hardball by Accolade for the Commodore 64, created by Martijn Bosschaart and offered as high quality jpg.
€0,00 -
Elite C64 game poster (high quality JPG)
Recreation of the poster for Elite by Firebird for the Commodore 64, done by Martijn Bosschaart and offered as high res JPG.
€0,00 -
Ghostbusters C64 game poster (high quality JPG)
Recreation of the iconic poster of the Ghostbusters game by David Crane for the Commodore 64, done by Martijn Bosschaart and offered as high res JPG.
€0,00 -
Turrican 2 poster (high quality JPG)
Turrican 2 game poster (re)created by Martijn Bosschaart offered as high res JPG.
€0,00 -
Turrican Poster (high quality JPG)
Turrican game poster (re)created by Martijn Bosschaart.
€0,00 -
IK+ Poster (high quality JPG)
International Karate + (IK+) by Archer Maclean game poster created by Martijn Bosschaart offered as high res JPG.
€0,00 -
New and original power switch for Commodore 64, 128 and 1541-II & 1581 diskdrives
All new and original spare part. Fits the Commodore 64, 128 wedge model and the 1541-II & 1581 diskdrives as a drop in replacement.
€4,95
