Space Saver Pro

17,95

In stock

The SpaceSaver Pro cable for the C64 and VIC20 CR* is THE solution to the inefficient use of space that traditional power cables cause by connecting to the power-plug in a straight line. Because of the elbow design, the power-cable leaves the C64 at a 90 degree angle towards the back, reducing the cable footprint dramatically.

 

This high quality cable not only is fully injection moulded, it also has a built-in overvoltage protector on the 5V supply, to avoid damage by faulty power supplies. A small window in the connector allows you to see the led indicator, where green means all is ok, but red indicates an overvoltage. Whenever the 5V rail goes over the 5.4V threshold, the circuit inside will cut the power within nanoseconds, to prevent any harm to the chips inside your beloved machine.

 

Your power supply plugs right into the female DIN connector, and the 30cm long 20AWG grade wiring in between the connectors makes sure this cable can handle currents up to 3.5A. A grippy surface makes plugging in and removing the cable easy, avoids stress on the internal cable joints, and there is enough clearance to accommodate the many variances in case/socket depth, which prevents the cable casing from putting permanent stress on the power socket.

 

*The VIC20 CR (cost reduced) version uses the same power connector as the C64, and has a separate +5V rail which is susceptible to overvoltage from a bad PSU.

For EU customers, price listed includes applicable VAT rate

Limited Warranty: 60 Days

Condition: New SKU: HW-C64-SSPro Categories: , Tags: , , ,

The SpaceSaver Pro cable for the C64 and VIC20 CR* is THE solution to the inefficient use of space that traditional power cables cause by connecting to the power-plug in a straight line. Because of the elbow design, the power-cable leaves the computer at a 90 degree angle towards the back, reducing the cable footprint dramatically.

This high quality cable not only is fully injection moulded, it also has a built-in overvoltage protector on the 5V supply, to avoid damage by faulty power supplies. A small window in the connector allows you to see the led indicator, where green means all is ok, but red indicates an overvoltage. Whenever the 5V rail goes over the 5.4V threshold, the circuit inside will cut the power within nanoseconds, to prevent any harm to the chips inside your beloved machine.

Your power supply plugs right into the female DIN connector, and the 30cm long 20AWG grade wiring in between the connectors makes sure this cable can handle currents up to 3.5A. A grippy surface makes plugging in and removing the cable easy, avoids stress on the internal cable joints, and there is enough clearance to accommodate the many variances in case/socket depth, which prevents the cable casing from putting permanent stress on the power socket.

 

*The VIC20 CR (cost reduced) version uses the same power connector as the C64, and has a separate +5V rail which is susceptible to overvoltage from a bad PSU.

For EU customers, price listed includes applicable VAT rate

Shipping Countries: Netherlands, Denmark, France, Italy, Austria, Spain, Germany, Luxembourg, Belgium, Sweden, Cyprus, Finland, Ireland, Croatia, Faroe Islands, Poland, San Marino, Slovenia, Greece, Czech Republic, Latvia, Bulgaria, Lithuania, Portugal, Greenland, Hungary, Malta, Estonia, Romania, Slovakia, Albania, Montenegro, Ukraine, Andorra, Norway, United Kingdom (UK), Belarus, Serbia, Vatican, Bosnia and Herzegovina, Turkey, Switzerland, Moldova


Ready to ship in 3-5 business days from Netherlands


 

Shipping Policy

All shipments typically sent within 3-5 business days if products are in stock.
Using the Track and Trace shipment option is highly recommended.
Assembled Sixtyclones will only be sent with T&T and insurance.

IMPORTANT! While we do offer the option of cheaper untracked shipping to make sure the purchase of smaller sized items stays reasonable, due to the current situation with overloaded postal services due to COVID-19, there is a higher risk of serious delays or even damage and loss completely outside of our control. Our advice is to only use this shipping method for smaller items with acceptable risk to delay or loss. Inquiries about shipments without tracking will not be possible (as there is no information to give). By choosing untracked shipping buyer accepts all risks involved and no claims will be accepted, nor will any restitution of costs be granted by Run Stop Re-Store in the case of a lost shipment.

Buyer is responsible for any import VAT and customs duties on import outside of the European Union. Tracked door to door shipments only available to the following countries : Australia, Austria, Belgium, Belarus, Brazil, Canada, Cyprus, Denmark, Estonia, Finland France, Germany, Greece,, Hong Kong Hungary, Iceland, Ireland, Indonesa, Israël, Italy, Japan, Croatia, Latvia, Lebanon, Lithuania, Luxemburg, Malasia, Malta, New-Zealand, Norway, Poland, Portugal, Russia, Saudi Arabia, Serbia, Singapore, Slovenia, Slovakia, South Korea, Spain, Sweden, Switzerland, Thailand, Turkey, United Kingdom, United States.


 

Refund Policy

Refunds only after product is returned in good order or order cancelled before shipping.
Return shipping costs are for receiver, unless there is an error or quality issue on our part.
On arrival please take photo of unopened package if you suspect contents are damaged or tampered with. Damaged packages have to be claimed immediately after receiving.

Be the first to review “Space Saver Pro”

Reviews

There are no reviews yet.

All sales are final (i.e. NO refunds). Margin goods, New Old Stock chips, and 2nd hand products have a limited 60 day warranty. New products (parts kits for example) carry warranty as dictated by EU Consumer laws. RMAs only after approval and assigned RMA nr. Buyer is responsible for return shipping costs

Main Menu