No products in the cart.
-
-
Commodore VIC20 parts kit
Full parts kit for the Commodore VIC , rev 250403 (cost reduced final revision).
Building a VIC20 from scratch using Rob Taylor’s Vicky Twenty board or restoring one and don’t want to spend hours trying to source all the parts? Then this kit is for you!
The standard kit does not include any custom chips but those can be purchased separately (based on availability).
Kit consists of 5 subkits;
- Connector kit (including the very hard to get cartridge port connector)
- Capacitor and Resistors kit
- Powerrail, filters and semiconductor kit
- Logic and RAM kit
- Socket kit (choice of round pin or dual leaf)
The PCB is NOT included.
You can find the full Bill of Materials of this great kit here
If you want to build a NTSC machine, please leave a note when ordering. We will then add two 330R resistors for R5 and R6, and a 14.318 Mhz crystal. All other parts are suited for NTSC, except we don’t stock NTSC VIC chips.
Price listed includes applicable VAT rate
€71,95 – €84,95 -
Sixtyclone C64 replica revision 250407/466/469 full assembly service
CONTACT [email protected] before ordering!
Sixytclone bare-bone Commodore 64 motherboard revision 250407, 466 or 469 fully assembled.
- Blue, Black, Red or Purple PCB (official Sixtyclones). (subject to stock availability)
- Choice of gold plated turned (machined) pin sockets or high quality dual leaf.
- Choice of 0.1uF monolythic filter caps (yellow dippped MLCC or blue polyester packages).
- Nichicon Fine Gold and Frako audio grade electrolytic capacitors, or Panasonic and Cornell Dublier brand (black and blue colored).
- New passive components and semiconductors, bridge rectifier, choke filters etc etc
- New mechanical parts (DIN sockets, cartridge port connector, control ports + mounting screw and nut, power switch, pin headers, fuse and fuseholder.
- Modulator housing  and cartridge port shield refurbished and repainted (Silver, Gold, Black), or modern alternative (c0pperdragon) fitted.
- Comes populated with all new logic chips and RAM but does NOT include CPU, SID, VIC, PLA, CIAs, or ROMs. (Pictures showing any custom chips are for illustration purposes only). PLA replacement is an optional purchase (PLAnkton or NeatPLA, add EUR15)
- Optional ESD protection on control ports (add 5EUR)
- Free optional repainted (black) sidebracket when using breadbin cases.
- Board will be configured for PAL by default. NTSC on request.
After manual assembly the board will be thoroughly tested with a full chipset and diagnostic harness, including a multitude of different cartridge types.
Price includes tax
€199,00 -
Floppy Disk Drive Commodore Head Protector Card 251171-03
Fits Commodore 1541 1571 and other floppy disk drives
800Gr cardbord used for extra durability
NEW BATCH – BETTER QUALITY
€1,50€2,00 -
Commodore 64 heatsink kit
A set of heatsinks for Commodore 64’s. Keep your CPU, SID, VIC and PLA Â cool with these perfectly fitting black aluminum heatsinks.
Standard kit containes 2x 2 sizes, for 28 pin and 40 pin chip packages. XL contains 4x40p, 3x24p and 2x28p to cover all the MOS chips.
Heatsinks have thermal tape pre-applied, so no fiddling with thermal paste. Removal is also easy using a hairdryer, and leaves no residue on the chips.
Package includes an alcohol wipe to use before applying.
Price listed includes applicable VAT rate
€8,50 – €14,50 -
Raspberry PI4 64GB Plug and Play SD Card
Based on the Wolfanoz Image, we present you this incredible Raspberry Pi 4 Image
- Every Arcade and Retro Game you can think of, is in this image!!
- High Quality and Fast (130ms) Samsung SD Card
- Including Commodore 64 Emulator and Games
- Including Amiga Emulator and Games
- Easily add your own games
- Fully updated and Plug and Play image
€15,00€19,00 -
Commodore 64 Video Cable – High Quality
Handmade and tested High Quality video cable for your Commodore 64.
€14,95 -
CDTV CARDBOARD V2
– Including “Innards” for positioning the computer system and accessories
– Laminated outside / moisture repellent
– is delivered flat in a large envelope
€54,95 -
C64 Modulator replacement (c0pperdragon)
Replacement for the original RF modulator. Creates the output video signals needed to use the video out DIN connector of the C64 mainboard. Increased signal quality over the original by removal of obsolete components and less susceptible to interference. Â Board design by “c0pperdragon”. Â Fully manufactured PCB with components assembled at the factory. Ships with sets of male and female round pin headers for direct to board mounting, or make it removable. Comes with a full year warranty.
Price listed includes applicable VAT rate
€15,95 -
ArcadeR joystick – Beige – New in Box [NEW]
This is the ArcadeR joystick. A brand new joystick created for the most awesome retro gaming experience. Micro switched and customizable due to the use of industrial standard parts. Auto fire included. Available in several color schemes on our website.
€39,95€44,95