No products in the cart.
Commodore
Commodore International (other names include Commodore International Limited, or more simply Commodore) was an American home computer and electronics manufacturer founded by Jack Tramiel
-
-
Retro8Bit ULTIMATE Commodore USB Stick
Here it is! The ULTIMATE USB Stick with Commodore software, this is the stick you need! Software for the Amiga, C128, C64, C16, C4+, PET, Mini, Maxi and more!!! 60GB full of Commodore madness! Find a full index in the description below! Including a 250 game Carrousel and 800 optimized games for the Commodore Mini and Maxi! WHD Boot Loader included, so you can execute all the Amiga games (LHA) on your A500 Mini!
€15,00 -
Commodore VIC20 parts kit
Full parts kit for the Commodore VIC , rev 250403 (cost reduced final revision).
Building a VIC20 from scratch using Rob Taylor’s Vicky Twenty board or restoring one and don’t want to spend hours trying to source all the parts? Then this kit is for you!
The standard kit does not include any custom chips but those can be purchased separately (based on availability).
Kit consists of 5 subkits;
- Connector kit (including the very hard to get cartridge port connector)
- Capacitor and Resistors kit
- Powerrail, filters and semiconductor kit
- Logic and RAM kit
- Socket kit (choice of round pin or dual leaf)
The PCB is NOT included.
You can find the full Bill of Materials of this great kit here
If you want to build a NTSC machine, please leave a note when ordering. We will then add two 330R resistors for R5 and R6, and a 14.318 Mhz crystal. All other parts are suited for NTSC, except we don’t stock NTSC VIC chips.
Price listed includes applicable VAT rate
€71,95 – €84,95 -
Sixtyclone C64 replica revision 250407/466/469 full assembly service
CONTACT [email protected] before ordering!
Sixytclone bare-bone Commodore 64 motherboard revision 250407, 466 or 469 fully assembled.
- Blue, Black, Red or Purple PCB (official Sixtyclones). (subject to stock availability)
- Choice of gold plated turned (machined) pin sockets or high quality dual leaf.
- Choice of 0.1uF monolythic filter caps (yellow dippped MLCC or blue polyester packages).
- Nichicon Fine Gold and Frako audio grade electrolytic capacitors, or Panasonic and Cornell Dublier brand (black and blue colored).
- New passive components and semiconductors, bridge rectifier, choke filters etc etc
- New mechanical parts (DIN sockets, cartridge port connector, control ports + mounting screw and nut, power switch, pin headers, fuse and fuseholder.
- Modulator housing  and cartridge port shield refurbished and repainted (Silver, Gold, Black), or modern alternative (c0pperdragon) fitted.
- Comes populated with all new logic chips and RAM but does NOT include CPU, SID, VIC, PLA, CIAs, or ROMs. (Pictures showing any custom chips are for illustration purposes only). PLA replacement is an optional purchase (PLAnkton or NeatPLA, add EUR15)
- Optional ESD protection on control ports (add 5EUR)
- Free optional repainted (black) sidebracket when using breadbin cases.
- Board will be configured for PAL by default. NTSC on request.
After manual assembly the board will be thoroughly tested with a full chipset and diagnostic harness, including a multitude of different cartridge types.
Price includes tax
€199,00 -
Floppy Disk Drive Commodore Head Protector Card 251171-03
Fits Commodore 1541 1571 and other floppy disk drives
800Gr cardbord used for extra durability
NEW BATCH – BETTER QUALITY
€1,50€2,00 -
Commodore 1581 drive stickers
Set of 2 x 4 stickers for the Commodore 1581. (A total of 8 stickers)
4 piece original color and 4 pieces in black.
Printed on high quality white vinyl and finished with a durable satin laminate for protection.
€5,25 -
€3,25 – €4,25
-
Commodore 64 heatsink kit
A set of heatsinks for Commodore 64’s. Keep your CPU, SID, VIC and PLA Â cool with these perfectly fitting black aluminum heatsinks.
Standard kit containes 2x 2 sizes, for 28 pin and 40 pin chip packages. XL contains 4x40p, 3x24p and 2x28p to cover all the MOS chips.
Heatsinks have thermal tape pre-applied, so no fiddling with thermal paste. Removal is also easy using a hairdryer, and leaves no residue on the chips.
Package includes an alcohol wipe to use before applying.
Price listed includes applicable VAT rate
€8,50 – €14,50 -
Commodore 64 LOAD sticker / decal
Load”*”,8,1 decal / colour white
width: approx. 30cm
€4,75 -
Amiga 1200 – holographic Boing ball
Amiga 1200 – holographic Boing ball. Printed on high quality silver vinyl (holographic) and finished with epoxy gel.
€4,25 -
Amiga 1200 – holographic Checker
Amiga 1200 – holographic Checker. Printed on high quality silver vinyl (holographic) and finished with epoxy gel.
€4,25